基于Abaqus的双裂纹不同间距对裂纹扩展速率的研究

扩展有限元法是近年经过大量运用的,在传统有限元的范围中求解不连续问题一种有效计算方法,它是基于单位分解的思想,在计算不连续问题时加入跳跃函数。以ABAQUS为平台,基于扩展有限元方法 (XFEM),以含双穿透型裂纹的有限宽板受横向拉伸载荷为力学模型,建立相应的裂纹尖端应力的有限元模型,研究焊接接头区域不同间距双裂纹相互作用对裂纹扩展速率的影响。结果表明:双裂纹间距的的大小并没有对裂纹的扩展速率产生影响。     

High strain rate compressive response of the Cf/SiC composite

Carbon fiber reinforced ceramic owns the properties of lightweight, high fracture toughness, excellent shock resistance, and thus overcomes ceramic's brittleness. The researches on the advanced structure of astronautics, marine have exclusively evaluated the quasi-static mechanical response of carbon fiber reinforced ceramics, while few investigations are available in the open literature regarding elastodynamics. This paper reports the dynamic compressive responses of a carbon fiber reinforced silicon carbide (C_f/SiC) composite (CFCMC) tested by the material test system 801 machine (MTS) and the split Hopkinson pressure bar (SHPB). These tests were to determine the rate dependent compression response and high strain rate failure mechanism of the C_f/SiC composite in in-plane and out-plane directions. The in-plane compressive strain rates are from 0.001 to 2200?s^?1, and that of the out-plane direction are from 0.001 to 2400?s^?1. The compressive stress-strain curves show the C_f/SiC composite has a property of strain rate sensitivity in both directions while under high strain rate loadings. Its compressive stiffness, compressive stress, and corresponding strain are also strain rate sensitive. The compressive damage morphologies after high strain rate impacting show different failure modes for each loading direction. This study provides knowledge about elastodynamics of fiber-reinforced ceramics and extends their design criterion with a reliable evaluation while applying in the scenario of loading high strain rate.     

Evaluation of bull fertility in Italian Brown Swiss dairy cattle using cow field data

Dairy bull fertility is traditionally evaluated using semen production and quality traits; however, these attributes explain only part of the differences observed in fertility among bulls. Alternatively, bull fertility can be directly evaluated using cow field data. The main objective of this study was to investigate bull fertility in the Italian Brown Swiss dairy cattle population using confirmed pregnancy records. The data set included a total of 397,926 breeding records from 1,228 bulls and 129,858 lactating cows between first and fifth lactation from 2000 to 2019. We first evaluated cow pregnancy success, including factors related to the bull under evaluation, such as bull age, bull inbreeding, and AI organization, and factors associated with the cow that receives the dose of semen, including herd-year-season, cow age, parity, and milk yield. We then estimated sire conception rate using only factors related to the bull. Model predictive ability was evaluated using 10-fold cross-validation with 10 replicates. Interestingly, our analyses revealed that there is a substantial variation in conception rate among Brown Swiss bulls, with more than 20% conception rate difference between high-fertility and low-fertility bulls. We also showed that the prediction of bull fertility is feasible as our cross-validation analyses achieved predictive correlations equal to 0.30 for sire conception rate. Improving reproduction performance is one of the major challenges of the dairy industry worldwide, and for this, it is essential to have accurate predictions of service sire fertility. This study represents the foundation for the development of novel tools that will allow dairy producers, breeders, and artificial insemination companies to make enhanced management and selection decisions on Brown Swiss male fertility.     

Forging furnace with thermochemical waste-heat recuperation by natural gas reforming: Fuel saving and heat balance

This paper considers thermochemical recuperation (TCR) of waste-heat using natural gas reforming by steam and combustion products. Combustion products contain steam (H₂O), carbon dioxide (CO₂), and ballast nitrogen (N₂). Because endothermic chemical reactions take place, methane steam-dry reforming creates new synthetic fuel that contains valuable combustion components: hydrogen (H₂), carbon monoxide (CO), and unreformed methane (CH₄). There are several advantages to performing TCR in the industrial furnaces: high energy efficiency, high regeneration rate (rate of waste-heat recovery), and low emission of greenhouse gases (CO₂, NO_x). As will be shown, the use of TCR is significantly increasing the efficiency of industrial furnaces – it has been observed that TCR is capable of reducing fuel consumption by nearly 25%. Additionally, increased energy efficiency has a beneficial effect on the environment as it leads to a reduction in greenhouse gas emissions.     

Robust method to provide exponential convergence of model parameters solving linear time-invariant plant identification problem

The scope of this research is a problem of parameters identification of a linear time-invariant plant, which (1) input signal is not frequency-rich, (2) is subjected to initial conditions and external disturbances. The memory regressor extension (MRE) scheme, in which a specially derived differential equation is used as a filter, is applied to solve the above-stated problem. Such a filter allows us to obtain a bounded regressor value, for which a condition of the initial excitation (IE) is met. Using the MRE scheme, the recursive least-squares method with the forgetting factor is used to derive an adaptation law. The following properties have been proved for the proposed approach. If the IE condition is met, then: (1) the parameter error of identification is bounded and converges to zero exponentially (if there are no external disturbances) or to a set (in the case of them) with an adjustable rate, (2) the parameters adaptation rate is a finite value. The above-mentioned properties are mathematically proved and demonstrated via simulation experiments.     

Phase-change regulation criterion based on size-dependent lattice distortion rate and born theory for VO2 nanomaterials

Vanadium dioxide (VO₂) is a promising thermally induced phase transition material because of the abrupt changes in electrical and optical properties. However, the high phase transition temperature of VO₂ and its unspecified modulation relationship need to be resolved urgently. Herein, we proposed a simple and precise regulation criterion for VO₂ materials based on size-dependent lattice distortion rate and Born theory. The results indicated that the application of a tensile stress changed the elastic properties of the VO₂, which promoted VO₂ phase transition, and regulated the phase transition temperature. Moreover, the specific modulation relationship between the stress and phase transition temperature of VO₂ was confirmed experimentally. These results show that our criterion provides theoretical guidance to regulate VO₂ thermally induced phase transition materials.     

42CrMo钢加热过程中的奥氏体晶粒尺寸演变

通过金相试验方法测定42CrMo钢在890~930 ℃下保温10~240 min后的晶粒尺寸。结果表明,42CrMo钢在加热到试验温度890~930 ℃时已经完全奥氏体化,保温过程中的晶粒生长属于正常生长;加热温度对晶粒尺寸的影响较大,保温时间对晶粒尺寸的影响较小;随保温时间的延长晶粒生长缓慢,晶粒尺寸与保温时间满足指数小于1的函数关系。基于试验数据,通过线性回归得到晶粒长大的Beck模型参数,通过非线性回归得到Sellars和Anelli模型参数,3个模型的预测精度都较好,而Anelli模型的适用性要高于Beck模型和Sellars模型,故在预测42CrMo钢的奥氏体晶粒长大规律时宜使用Anelli模型。     

高熔体流动速率薄壁注塑聚丙烯专用料的结构与性能分析

采用多种分析测试方法，对3类高熔体流动速率薄壁注塑聚丙烯（PP）专用料的熔融结晶性能、光学性能、分子量分布、力学性能、毛细管流变性能、热收缩性能进行了分析研究。结果表明，K1860与2种市售主流PP1、PP2各项性能相当，其中K1860分子量分布相对PP1、PP2较窄，弯曲性能、拉伸性能更优，可满足大型薄壁注塑制品的生产要求。     

High-rate capability of carbon-coated micron-sized hexagonal TT-Nb2O5 composites for lithium-ion battery

With excellent specific capacity, superior cycle stability, safety and strong practical, Nb₂O₅ has been considered as one of the prospective anode materials for lithium-ion batteries (LIBs). However, current study suggests that Nb₂O₅ electrode materials for LIBs still face the vital issues of low electrical conductivity and poor rate performance. Therefore, carbon-coated TT-Nb₂O₅ materials are designed and synthesized through solid state method in this work, which present high specific capacity (228 mA h g^?1 at 0.2C), satisfactory rate properties (107 mA h g^?1 at 20 C). The outstanding electrochemical property can not only give the credit to the pseudocapacitance effect of TT-Nb₂O₅, but also attribute to introduction of carbon. The homogeneous carbon-coated materials enhance the electrical conductivity, increase the electron transmission speed and alleviate particle crushing. This research not only offers a new method for preparing excellent electrode materials, but also provides a kind of excellent anode material with prospective application for LIBs.